Aqua Lung WTX-D Buoyancy System User Manual

Page 15

Table of Contents

4. Repeat the process for the lower cylinder band.
See the following section to finish attaching the WTX-D system to a cylinder:

NOTE:

Apeks recommends using traction sleeves with universal cylinder bands as added

security to keep the cylinder from slipping during the course of a dive.

2. Turn the buoyancy cell over and place the ultralight

plate on top with the Apeks logo face up. Insert the

cylinder band end through the oval grommet hole

in the ultralight plate on the same side. Bring the

cylinder band end around the plate and exit the oval

grommet holes on the upper right side. Make sure

the cylinder band passes through both the ultralight

plate and buoyancy cell grommet holes.

3. Turn the buoyancy cell back over, so the zipper side

is face up. Slide the traction sleeve (PN 10017, sold

separately) onto the open end of the cylinder band

with the ribbed side facing toward the cylinder.