AML M7140 Stationary Terminal - Manual (Page 43)

40
Startup Options
The “Startup Options” function allows the operator to setup various options used when the
M7140 is first powered on.
Basic Dir: This specifies the directory listing used when the basic option is
selected from the Tools/Utilities menu.
Basic Mode: This is the default mode that Basic programs will run under. This
mode can be changed at the Basic function prompt.
Start Dir: This is the directory that the M7140 terminal will use for any auto-start
programs.
Start Prog: This is the program the M7140 will automatically start when the unit
is powered on.
When a startup program is specified, the M7140 will not start the
internal telnet program.
Start Param: These are any optional settings that the auto-start program will use
when started.
Network Delay: This is the delay in milliseconds the M7140 will wait before starting
the auto-start program. This gives the network time to setup routers
and paths to the M7140.
Enable Servers This allows you to disable network connectivity to the M7140. This is
usually used to keep the M7140 more secure over a network.
Disabling these functions will prevent file transfers and operating
system updates.
Do not disable the M7140 FTP server function if you are using the
CommandLink™ Host server.