AML M7140 Stationary Terminal - Manual (Page 29)

26
To modify an encryption key set simply highlight the appropriate key set. Note that the
number of key pairs will change depending on which encryption format you are using.
Note: Some manufacturers will call their 40 bit encryption 64 bit encryption or call their 128
bit encryption 160 bit encryption; in any case they are the same settings. Also some
manufacturers will number their keys 1 to 4; these keys match the 0 to 3 keys on the M7140.
The current key set MUST match exactly, in the
same sequence, the key set that is currently
enabled in the Access Points, and be the same
key set listed in the “Key ID” field.
The Mode setting determines what type of network is in use.
The Infrastructure Mode is for connecting the M7140 Desktop terminal to a network of access
points. The Ad Hoc Mode is used for connecting the M7140 to a single access point or a
single radio card in a peer-to-peer network, such as a single laptop computer for example. The
M7140 will not have access to network resources in Ad Hoc mode.