AML M7140 Stationary Terminal - Manual (Page 30)

27
The Auth setting determines what type of network system you are using.
These two modes simply define how the above key sets will be used to encrypt the data sent
over the radio. Whichever mode is selected, the access point MUST be set to the same mode
for communications to take place.
The Power Save setting will force the radio card to turn off when not in use to save power. If
you experience connection problems, turn the Power Save feature off. Battery life will be
shortened with the Power Save feature shutoff.
The Channel setting determines which channel the radio card will start to communicate on.
This should be set to the same channel as the access points.