4 wpa2-enterprise wireless access – Amer Networks WAP43DC Fat Web User Manual
Page 42

42
WAP43DC FAT Web Manual Chapter 6 Configuration Examples
6.3.3 Test the Configuration Results
Enable the wireless client and refresh the network list. Find the configured network
service in the list of “choose wireless network” (it is PSK in this example). Click
“connect” and input the pre-shared key as 12345678 in the dialog box (the input pre-
shared key must be the same as the configured pre-shared key on the device). After
associated with the AP successfully, users can access the wireless network.
Enter into the client association page and the successful online clients can be
viewed.
6.4 WPA2-Enterprise Wireless Access
6.4.1 Networking Requirements
In an office environment, the staff needs to have constant access to the wireless
network; while other foreign devices should be denied access. The administrator can
configure the WPA2-Enterprise through the web function. The detailed features are listed
below:
•
AP provides the WPA2-Enterprise wireless access service with SSID as
“WPA-Enterprise”.
•
For meeting the high bandwidth demands of wireless users, select the 802.11n
(2.4GHz) RF mode.
Fig 1-19 WPA2-Enterprise wireless access
6.4.2 Configuration Steps
1. Login into the AP configuration page and enter into the wireless configuration page.