2 upgrade – Amer Networks WAP43DC Fat Web User Manual
Page 36

36
WAP43DC FAT Web Manual Chapter 5 Maintenance
5.2 Upgrade
Platform Version of firmware
Show the version firmware of the current
AP.
Complete the firmware upgrading of the AP by using HTTP through the following steps:
1. Choose HTTP as the upgrading method.
2. Browse for the firmware file.
The firmware file should have the extension ".tar".
3. Click the “Firmware Upgrading” button to apply the new firmware file.
The controller will display the next steps.
4. Click the “Confirm” button to start the upgrading process.
The upgrading process may take a few minutes. During this time, the AP cannot be
accessed. Do not unplug the AP or restart it. After upgrading, the AP will restart. Upon
competition, the AP will automatically configure to its previous settings.
5. Check the firmware version within the firmware management page (or the basic
configuration label). If the upgrading was successful, the new version will be displayed.