Amer Networks WAP43DC Fat Web - Manual (Page 33)

33
WAP43DC FAT Web Manual Chapter 4 Advance Configuration
4.6 AP Modes
The AP modes can be switched on this page. Configure the address of the AC and
the password of an AP.
Managed AP
Administrative Mode Click Mode Fit to allow the AP and switch to discover each other.
If the AP successfully authenticates itself with a wireless switch,
you will not be able to access the Administrator UI.
Click Mode Fat to prevent the AP from contacting wireless
switches.
Switch IP address Enter the IP address of up to four wireless switches that can
manage the AP. You can enter the IP address in dotted format or
as an DNS name.
You can view a list of wireless switches on your network that were
configured by using a DHCP server.
The AP attempts to contact Switch IP Address 1 first.
Switch IPv6 address Enter the IPv6 address of up to four wireless switches that can
manage the AP.
You can view a list of wireless switches on your network that were
configured by using a DHCP server.
The AP attempts to contact Switch IPv6 Address 1 first.
Pass Phrase Select the Edit option and enter a passphrase to allow the AP to
authenticate itself with the wireless switch. The passphrase must
be between 8 and 63 characters.
To remove the password, select Edit, delete the existing
password, and then click Update.
You must configure the same passphrase on the switch.