Amer Networks WAP43DC Fat Web - Manual (Page 39)

39
WAP43DC FAT Web Manual Chapter 6 Configuration Examples
Configure the VLAN ID according to the actual situation.
Configure SSID as “service”.
Use the default configuration for “broadcast SSID”.
Choose “None” for the security configuration.
Click “submit” button.
6.1.3 Test the Configuration Results
Enter into the client association page to view the successful on-line clients.
6.2 Cipher Wireless Access of Static-WEP (Open-System)
6.2.1 Networking Requirements
In a small office, the device administrator can complete the WEP (Open-System)
cipher configuration through the web page. The detailed commands are listed below:
• AP provides the WEP (Open-System) cipher wireless access service with an
SSID as “wep”.
• For meeting the high bandwidth demands of wireless users, select the 802.11n
(2.4GHz) RF mode.
Fig 1-14 WEP（Open-System） cipher wireless access
6.2.2 Configuration Steps
1. Login the AP configuration page and enter into the wireless configuration page.
Choose to enable for RF1.