Alinco DJ-X2 - Manual (Page 46)

4
Appendices
46
Operation Char
t
Function
Key Operation
Page P.15 P.15 P.18 P.16 P.19 P.19 P.20 P.21 P.29 P.17 P.18 P.32 P.30 P.33 P.34 P.35 P.36
[VOL/SQL] key, Adjust by [
▲
/▼
]
keys [VOL/SQL] key, Adjust by [
▲
/▼
]
keys [▲
/▼
] keys [1MHz (ANT)]+[
▲
/▼
] keys
[10MHz (BANK)]+[
▲
/▼
] keys
[MONI (SCRT)] key [SCAN (MODE)] key [SCAN (MODE)] key [PS (STEP/SKIP)] key Select by [
▲
/▼
] keys, then [PS
(STEP/SKIP)] key to start [SCAN (MODE)] key Select by [
▲
/▼
] keys, then [SCAN
(MODE)] key to start Hold down [V/P/M (MW)] key and Power ON Select by [
▲
/▼
] keys
[V/P/M (MW)] key [10MHz (BANK)] key [▲
/▼
] keys [FUNC/ENTER]+[V/P/M] keys [FUNC/ENTER]+[1MHz (ANT)] keys Select by [
▲
/▼
] keys
[FUNC/ENTER]+[SCAN (MODE)] keys (Impossible to change AM radio (DJ-X2E), and when the tuning step is AUTO.) [FUNC/ENTER]+[PS (STEP/SKIP)] keys Select by [
▲
/▼
] keys
[FUNC/ENTER]+[PS (STEP/SKIP)] keys
Adjusting the audio volume Adjusting the Squelch level Setting the frequency Monitoring VFO scan Preset scan Program scan Memory scan Switching between Easy/ Expert modes Switching between operating modes Switching between Memory/ Preset banks Selecting Memory/ Preset channels Programming a Memory channel Selecting the antenna Switching the modulation mode Changing the tuning step Memory skip setting