Alinco DJ-X2 - Manual (Page 24)

2
BasicO peration
24
Cautions! ·
Operate in a quiet environment where doors and windows are closed. It is hard to find a listening microphone in a noisy environment.
· Depending on the modulation setting, this function may not work correctly. ·
When the battery voltage is low, this function does not work normally. Be sure to charge the internal lithium-ion battery completely, load new alka- line batteries, or supply sufficient voltage from the DC power supply.
·
Since this function detects a bugging signal by the presence or absence of a howling noise, a loud sound may be emitted during detection, howev- er, it is not a malfunction.
· Detection area is approximately 15 - 20 square meters (18 - 24 square
yards) depending on the type of listening microphone.
How do you stop detecting? Turn the power OFF, then hold down the [MONI (SCRT)] key and turn the power ON.
K
e
yloc
k
To prevent incorrect or unauthorized operations, you can lock the keys. The following operations can be used while the keylock is ON.
· Monitor function · Adjusting the audio volume and squelch · Canceling the keylock
To lock the keys:
1
Hold down the [FUNC/ENTER] key for a second. The key lock will turn ON, and the key icon will appear on the display.
How do you cancel the keylock? Hold down the [FUNC/ENTER] key for a second while the keylock is ON. The keylock will turn OFF, and the key icon will disappear.
WIDE BAND COMMUNICA
TION RECEIVER DJ-X2
0.5
~ 1000MHz
700 MEMOR
Y
CHANNELS
RX FREQUENCY
X2
V / P
/ M
1MHz
SCAN
VOL/SQL
M W
ANT
MODE
SET
MONI
10MHz
P S
FUNC
SCR
T
BANK
STEP/SKIP
ENTER
DOWN UP BATTERY ・・ EXTERNAL
Lithium-ion
BATTERY INSIDE
1
Appears.