Alinco DJ-X2 User Manual

Page 39

Operatingi

xpertM

ode

■

TT (Atten

uator) function

This function attenuates strong signals on nearby channels.

Use this function when the received signal is influenced by a strong signal.

ATT function attenuates about 20 dB in received signal.

Select "Att" in the setting mode.

· Select ON/OFF by pressing the [

▲
/
▼
] keys.

· The default setting is OFF.

■

Bank link setting

This is the setting for the "Bank link scan", which scans specified multiple

banks.

You can select up to 5 banks from 10 programmed banks.

Select "bL" in the setting mode.

· Select Bank link No. by pressing the [

▲
/
▼
] keys.

Select a bank to link by pressing the [10MHz (BANK)] key. One bank can be

assigned to each bank link No. 0-4.

Tip

When only one bank is set to the bank link, if you execute the bank link scan,

only one bank will be scanned.

· For more information, see "Memory Scan". (P.21)

Bugging detector detects the listening microphone from bank-linked memories.

When using the bugging detector, corresponding banks must be linked.

When using the bugging detector, bank No. 0 must be included in bank link

setting.

Bank No.

Bank link No.

Select ON/OFF