Alinco DJ-X2 - Manual (Page 33)

33
3
Operatingi nE xpertM ode
Setting the Antenna
You can select the antenna depending on the frequency you wish to receive. The DJ-X2 has three types of antennas.
External antenna
···························The SMA antenna attached to the DJ-X2.
Earphone antenna
·························
The earphone's cord performs the role of antenna.
Bar antenna
···································
The internal antenna which receives AM radio. (DJ-X2T: 530 kHz - 1710 kHz (step: 10 kHz), DJ-X2E: 522 kHz - 1620 kHz (step: 9 kHz))
■
When receiving an
y frequenc
y e
xcept AM radio
1
Press the [FUNC/ENTER] key. "F" will appear on the display.
2
Press the [1MHz (ANT)] key. "EAr on/oF" (which shows the status of the earphone antenna) will appear on the display.
3
Select ON or OFF by pressing the [
▲
/
▼
] keys.
EAr on
: Receives with the earphone antenna.
EAr oF
: Receives with the external antenna.
(The default setting is OFF.)
4
Press the [FUNC/ENTER] key. The setting will be completed.
Tip When using the earphone antenna, a signal may be unstable depending on the position of the earphone cord.
WIDE BAND COMMUNICA
TION RECEIVER DJ-X2
0.5 ~ 1000MHz
700 MEMOR
Y
CHANNELS
RX FREQUENCY
X2
V / P
/ M
1MHz
SCAN
VOL/SQL
M W
ANT
MODE
SET
MONI
10MHz
P S
FUNC
SCR
T
BANK
STEP/SKIP
ENTER
DOWN UP BATTERY ・・ EXTERNAL
Lithium-ion
BATTERY INSIDE
Select ON/OFF
.
3 2
1,4