Alinco DJ-X2 User Manual
Page 21
21
2
BasicO
peration
4
Press the [PS (STEP/SKIP)] key.
Program scan starts. "." (decimal point) flashes on the display, and "PS"
appears on the display.
Scanning pauses when receiving a signal.
Tip
The tuning step and modulation mode of Program scan depends on the settings
in the VFO mode.
■
Memor
y scan
This function scans the specified banks or all banks in the Memory mode.
There are three types of Memory scan.
Bank scan
·····································Scans a specified bank only.
Bank
link
scan
·······························Scans multiple banks. Up to five banks can
be linked. Link setting is required in
advance. For more information, see "Bank
link setting". (P.39)
All-bank scan
································Scans banks 0 to 9.
To operate Memory scan:
1
In Memory mode, press the [SCAN (MODE)] key.
Type of Memory scan will appear on the display.
2
Select a type of Memory scan by pressing the [
▲
/
▼
] keys.
MEMory
: Bank scan
LInk
: Bank link scan
ALL
: All-bank scan
If you select Bank scan, the currently displayed bank in the Memory mode
will be scanned.
WIDE BAND COMMUNICA
TION RECEIVER DJ-X2
0.5
~
1000MHz
700 MEMOR
Y
CHANNELS
RX FREQUENCY
X2
V / P
/ M
1MHz
SCAN
VOL/SQL
M W
ANT
MODE
SET
MONI
10MHz
P
S
FUNC
SCR
T
BANK
STEP/SKIP
ENTER
DOWN
UP
BATTERY
・・
EXTERNAL
Lithium-ion
BATTERY INSIDE
Select a type of Memor
y scan.
2
1,3