Alinco DJ-X2 User Manual
Page 41

41
3
Operatingi
nE
xpertM
ode
■
Timer scan/Busy scan setting
You can set the scan-resume condition.
While executing the scan, if the DJ-X2 receives a signal, scanning will pause.
You can set the timing that the DJ-X2 restarts scanning.
Timer
scan
(tIMEr)
·························
Restarts after five-second stop, even while
still receiving a signal.
Busy
scan
(bUSy)
·························Restarts when the DJ-X2 does not receive a
signal.
Select "tIMEr" or "bUSy" in the setting mode.
· Select Timer/Busy scan by pressing the [
▲
/
▼
] keys.
· The default setting is Timer scan.
■
BS (Batter
y sa
ve) function
This function extends battery life.
If there is no key operation for five seconds, the internal power rapidly cycles
between ON and OFF.
Select "bS" in the setting mode.
· Select ON/OFF by pressing the [
▲
/
▼
] keys.
· The default setting is ON.
Select ON/OFF
.
Select Timer/Busy scan.