Ke yboar d – Alinco DJ-X2 User Manual
Page 12
1
Namesa
ndFunctions
of
Parts
12
K
e
yboar
d
"F" appears on the display when you press the [FUNC/ENTER] key.
In Easy mode, the [FUNC/ENTER] key is not available except for Keylock.
Key
Function
Switches the operating mode. (P.17)
When "F" is displayed, programs and clears the
memory channels. (P.30)
In VFO mode, pressing the [
▲
/▼
] while this key
is held down increases/decreases the frequen-
cy by 1 MHz-step. (P.18)
When "F" is displayed, switches the type of
antenna. (P.33)
Executes scanning. (P.19)
When "F" is displayed, switches the modulation
mode. (P.34)
Adjusts the audio volume and squelch level. (P.15)
When "F" is displayed, switches the item in the
setting mode. (P.38)
Squelch unmutes while this key is held down.
(P.16)
When "F" is displayed, used for descrambling .
(P.37)
In VFO mode, pressing the [
▲
/▼
] while this key
is held down increases/decreases the frequency
by 10 MHz-step. (P.18)
Switches the preset and memory bank.
Used for selecting the channel of the program
scan function, and starting it. (P.20)
When "F" is displayed, sets the tuning step and
memory skip. (P.35,36)
Used for starting and selecting various settings.
Locks key operation. (P.24)
[V/P/M (MW)] key
[1MHz (ANT)] key
[SCAN (MODE)] key
[VOL/SQL(SET)] key
[MONI (SCRT)] key
[10MHz (BANK)] key
[PS(STEP/SKIP)]
key
[FUNC/ENTER] key
①
②
③
④
⑤
⑥
⑦
⑧
V/P/M
1MHz
SCAN
VOL/SQL
MW
ANT
MODE
SET
MONI
10MHz
PS
FUNC
SCR
T
BANK
STEP/SKIP
ENTER
①
②
③
④
⑤
⑥
⑦
⑧