Alinco DJ-X2 - Manual (Page 22)

2
BasicO peration
22
3
Press the [SCAN (MODE)] key. Bank scan starts, and "." (decimal point) flashes on the display. The DJ-X2 stops scanning when receiving a signal.
Tip The following are common to all the scans. ·
Scanning direction depends on the direction of the last operation.(Except for Program scan.)
· Scanning direction can be changed by pressing the [
▲
/
▼
] keys.
· To stop scanning, press any key except the [
▲
/
▼
] and [MONI (SCRT)] keys.
·
If you press the [MONI (SCRT)] key while scanning, scanning pauses, and the squelch unmutes. Releasing the [MONI (SCRT)] key resumes scanning.
· You can set the scan-resume conditions. For more information, see "Timer
scan/Busy scan setting". (P.41)