Alinco DJ-X2 - Manual (Page 32)

3
Operatingi nE xpertM ode
32
■
Selecting a c
hannel
To call up a frequency programmed in a channel:
1
Switch to the Memory mode by pressing the [V/P/M (MW)] key.
2
Select a bank by pressing the [10MHz (BANK)] key.
3
Select a channel by pressing [
▲
/
▼
] keys.
It is not possible to select a channel which is not programmed.
■
Clearing a c
hannel
To clear a channel:
1
Switch to the Memory mode by pressing the [V/P/M (MW)] key.
2
Select a channel which you want to clear.
3
Press the [FUNC/ENTER] key. "F" will appear on the display.
4
Press the [V/P/M (MW)] key. The channel will be cleared.
Tip You can clear all the programmed channels at one time. For more information, see "Resetting" (P.25).
WIDE BAND COMMUNICA
TION RECEIVER DJ-X2
0.5
~ 1000MHz
700 MEMOR
Y
CHANNELS
RX FREQUENCY
X2
V / P
/ M
1MHz
SCAN
VOL/SQL
M W
ANT
MODE
SET
MONI
10MHz
P S
FUNC
SCR
T
BANK
STEP/SKIP
ENTER
DOWN UP BATTERY ・・ EXTERNAL
Lithium-ion
BATTERY INSIDE
Channel No.
3
2
Bank No.