Alinco DJ-X2 - Manual (Page 30)

3
Operatingi nE xpertM ode
30
Tip The settings you change in Expert mode are valid even after returning to Easy mode, however, they cannot be changed in Easy mode.
Memor
y Function
This function allows you to program the frequently used frequencies, and call them up. A programmed frequency is called a channel. The DJ-X2 has four types of memory functions; Memory bank channel, Program channel, Search-pass memory channel, and Priority channel.
■
T
ypes of Memor
y
Memory
bank
channel
····················
The channel which is called up in Memory mode. The DJ-X2 has 700 Memory bank channels (70 channels 5 10 banks). You can call up a frequently used frequency easily.
Program
channel
·····························A channel which is used for Program scan.
You can program 20 pairs of frequency ranges (upper and lower limits). (P.20)
Search-pass memory channel
········I
f
you program a frequency which you do
not want to use, it will be skipped when exe- cuting VFO scan and Program scan. You can program up to 100 "Skip" channels.
Priority channel
·······························
The channel which is used for Priority monitor- ing functions. You can program up to 8 chan- nels.(P.43)
Tip When you program a frequency in Search-pass memory channel, you have to set the mode in FM. Please refer to "Selecting the Modulation
Mode" (page 34) for the setting.
■
Pr
ogramming a c
hannel
To program the channel:
1
In VFO mode, select the frequency which you want to program.
2
Press the [FUNC/ENTER] key. "F" will appear on the display.