Bug ging detector, Caution – Alinco DJ-X2 User Manual
Page 23
23
2
BasicO
peration
Bug
ging Detector
The DJ-X2 detects a bugging signal by scanning frequencies in the pro
-
grammed memory banks. When a listening microphone is found, the DJ-X2
notifies you with its display.
Caution!
Be sure to remove the earphone when detecting bugging.
1
Hold down the [MONI (SCRT)] key, and turn the power ON.
"●
" will appear on the display, and the DJ-X2 starts scanning according to
the set memory bank link.
When a bugging signal is found, "dC" flashes on the display, and scanning
stops.
Press the [VOL/SQL (SET)] key to adjust the audio volume.
Adjust the audio volume so that the howling noise sounds at an angle to the
DJ-X2, and detect the listening microphone. Be sure not to cover the speaker.
Flashes.
WIDE BAND COMMUNICA
TION RECEIVER DJ-X2
0.5
~
1000MHz
700 MEMOR
Y
CHANNELS
RX FREQUENCY
X2
V / P
/ M
1MHz
SCAN
VOL/SQL
M W
ANT
MODE
SET
MONI
10MHz
P
S
FUNC
SCR
T
BANK
STEP/SKIP
ENTER
DOWN
UP
BATTERY
・・
EXTERNAL
Lithium-ion
BATTERY INSIDE
1
Appears.