beautypg.com

Set the schedule – ACTi INR-410 INR-420 V3.0.09 User Manual

Page 88

background image

www.acti.com

INR-410/420 System Administrator’s Manual

88

Post-event Recording

Buffer (sec):

This will determine how long after the event is triggered should be

included in the event recording file. Available choices are 10, 30, 60,

120, 180, and 300 seconds.

Keep Recording Files

for (1-999 days):

The NVR server will keep recording file of specific device for the

number of days you set here. The default value is 30, and if you want

to modify it, please check the box to start configuring it. Available value

is among 1~999 days.

Specific Storage

You can assign a dedicated storage disk for a camera. By enabling this

option and assigning a specific disk, the video footages will be

recorded only to this selected disk rather than those you select on

Setup page Storage tab. Please remember to configure the

storage-related settings for this specific disk on Setup page

Storage tab after you enable this option.

Set the Schedule

Here you can configure camera

’s recording schedule on 7 days / 24 hours basis. The schedule

is split into segments of 20-minute length. By default, once a device is added to the system, its

schedule is automatically set to full time schedule recording and event handling. You should

configure it according to your system plan.

Go to Setup-Schedule tab, on Schedule Setting panel:

1. Select the recording mode from

Recording Mode Bar

Tip

How to make proper storage arrangement

In NVR 3.0 system, there are two file-deleting mechanisms you can use based on different

needs. If both rules are set, the one with the threshold to be reached earlier will execute the

deletion first.

1.

Keep Recording Files for (1-999 days)” – Set this rule if you have the concern on

how long the recordings are kept, especially when you don’t want the old recordings

to stay longer in the system than a certain period.

2.

“Reserve space” in the Disk Drive List on Setup page Storage tab - If the disk

space is more critical in your system, please give an approximate value here, the

system will always reserve this amount of space to store the newer recordings.

Given that you set the Reserve space as 30G, while Keeping Recording Files setting is 5

days, certain recording file will be deleted when it has been kept on disk for 5 days, despite

that there is still plenty of available disk space.

Before setting up the rules, you can make use of a handy storage calculator provided by

ACTi to find out the estimated storage your system requires on ACTi corporate website.

http://www.acti.com/project_planner