ACTi INR-410 INR-420 V3.0.09 - Manual (Page 24)

www.acti.com
INR-410/420 System Administrator’s Manual
24
Definitions of LED Indicators
System LED Indicators:
HDD LED Indicators:
Indicator LED Status Description
HDD Power Solid The hard disk is powered on and ready.
HDD Activity Flashing There is read or write activity.
Turn Off the Unit
The device can be turned off by the methods described below, and the Power Status LED
Indicator will go off right after the device is turned off.
1. Shut down the system from Windows Start
 .
2. Press down Power Button to turn the device off.
To completely cut off the power supply of this unit, press down the Power Switch to the side
with “O” mark.
Indicator LED Status Description
System Power Solid The unit power is on.
System Activity
Solid The system is booting up.
Flashing There system is operating and there is activity.
LAN 1 Flashing There is network activity on LAN 1.
LAN 2 Flashing There is network activity on LAN 2.
Overheat Alert Solid The temperature has exceeded the threshold.
Power Failure Flashing A power failure occurs in the power supply.