ACTi INR-410 INR-420 V3.0.09 User Manual

Page 64

INR-410/420 System Administrator’s Manual

If the device you wish to add supports ONVIF, you can select

“ONVIF” for Media Type,

and the settings page will appear as below. Please fill in the five fields marked below that

are required to communicate with the device

– Media Type, IP Address, HTTP Port, User

Name and Password, and then click

“Apply”.

4. By applying the settings, the NVR server will get the video stream, and the camera will

have been successfully added to the NVR system. You may click Video, PTZ, or Preset

Tour (available for camera with pan/tilt/zoom capabilities) tabs to configure other

properties.

To directly access the device configurator webpage, simply click “Web Configurator” on

top left to open it. Certain advanced settings are only available through the web

configurator and not through NVR.