Step 2: mount the disk, Step 3: install the tray – ACTi INR-410 INR-420 V3.0.09 User Manual

Page 19

INR-410/420 System Administrator’s Manual

Step 2: Mount the Disk



Loosen the two screws on the Tray to remove the dummy disk.



Secure the hard disk on the Tray with the disk screws provided, and make sure the disk

connector faces towards the SATA contacts inside the unit.

Step 3: Install the Tray



Press on Key Lock, push the tray into the Bay until it stops.



Press on the Latch Lever until it clicks into place.

Repeat Step 1~3 to finish installing all the storage disks.