ACTi INR-410 INR-420 V3.0.09 - Manual (Page 21)

www.acti.com
INR-410/420 System Administrator’s Manual
21
Connect the Devices
Follow the procedures to connect the devices. These devices are supposed to get connected
in the sequence shown below.
Step Description

Connect the monitor to INR.
(Local display can support up to 2 different ports at the same time, e.g.HDMI x 2 or
HDMI + VGA)

Connect the USB keyboard and mouse to INR.

Finish setting up your eSATA storage device if needed (e.g. RAID configuration for
multiple disks), connect it to INR and power it on. INR will recognize it as a normal
single hard disk.

Connect the network switch to INR via one of the LAN ports.

Plug the power adapter into INR and electricity outlet.

Connect INR to the Internet if remote management via the Internet is required.
6
Internet
Tip
INR supports iSCSI NAS. For detailed information on how to use iSCSI NAS with INR, please
refer to our article introducing
Using iSCSI NAS with NVR .