ACTi INR-410 INR-420 V3.0.09 - Manual (Page 59)

www.acti.com
INR-410/420 System Administrator’s Manual
59
Add Devices on WAN or Other Local Area Networks
1. After selecting “Add Device Manually”, the camera settings page will appear as below.
The most important settings are (1) Media Type, (2) Protocol, (3) Camera IP, (4) HTTP
Port, and (5) User Name & Password. Please fill in these required fields for NVR to
communicate with the device.
If the device you wish to add supports ONVIF, you can select ONVIF for Media Type, and
the settings page will appear as below. The most important settings are (1) Media Type, (2)
Camera IP, (3) HTTP Port, and (4) User Name & Password. Please fill in these required
fields for NVR to communicate with the device.
Important Notice
1. For certain non-ACTi devices, you may need to configure the ONVIF user credentials of the
camera by accessing its Web Configuration page and managing the ONVIF Users List.
2. Functions supported for devices added through ONVIF are live streaming and adjustments to
video image settings.