Westermo MRD-3x0 - Manual (Page 77)

77 6623-3201
To add a second filter, again click the Add new custom filter
button. In the example shown in Figure 59, a custom filter is
created which will deny packets received from the LAN port,
from IP address 211.211.211.211 and destined to the wire-
less network. Again notice that in the centre column, Incoming
interface, Outgoing interface and Source address are checked. This
indicates these are the matching criteria that will be applied to
packets. All criteria that are unchecked will be ignored.
Figure 59: Adding a new custom filter