Westermo MRD-3x0 User Manual
Page 60

60
6623-3201
2. Choose a group of available IP addresses on the local
network. For example, if the IP address of the MRD-3xx is
192.168.2.200 with a netmask of 255.255.255.0, a group cho-
sen could be 192.168.2.100 to 192.168.2.199. This will provide
100 addresses for clients.
3. Tick the Enabled checkbox.
4. Enter the first address of the group in the Start Address box.
5. Enter the last address of the group in the End Address box.
6. Enter a lease time for the Default Lease time.
7. Enter a lease time for the Maximum Lease time.
8. Click the Update button to commit the changes.
4.3 Configuring clients to use the MRD-3xx
The MRD-3xx will act as a gateway for connections destined
over the wireless interface. The default configuration will pro-
vide Network Address Translation (NAT) and firewalling to
protect clients on the local network.
To configure clients to use the MRD-3xx as a gateway:
If the clients have a DHCP address allocated by the
•
MRD-3xx, they will have learned the necessary set-
tings. No further configuration is needed.
If clients have static IP addresses, set the default
•
route and DNS server to the IP address of the
MRD-3xx.