Westermo MRD-3x0 - Manual (Page 56)

56 6623-3201
4 Network
This section describes the confiuration of the Network or
LAN settings. This includes setting the IP Address of the MRD-
3xx Unit, configuring the DHCP server and the DNS settings.
4.1 LAN Interface
The LAN Interface refers to the two switched Ethernet ports
located on the front of the MRD-3xx. To access the LAN
Interface settings select the Network tab from the main menu
then the LAN tab from the sub-menu.
4.1.1 Changing the IP Settings of the LAN
Interface
The LAN IP address is the address used to access the MRD-
3xx via the LAN (Ethernet) interface. The default IP settings of
the MRD-3xx Unit / Router are:
IP Address: 192.168.2.200 •
Netmask: 255.255.255.0 •
The Network settings are contained on the Network / LAN
page under the Interface Configuration heading. To change the IP
settings :
1. Click the Network tab on the main menu, this will display the
LAN page as shown in Figure 47, the LAN interface settings are
in the section titled Interface Configuration.
2. Ensure that Enabled is set to Yes.
3. Enter the IP address in the IP Address box.
4. Enter the Netmask in the Netmask box, to that of the sub-
net to which the unit is connected.
5. Click the Update button at the bottom of the page to com-
mit the changes.