Westermo MRD-3x0 - Manual (Page 63)

63 6623-3201
Once registration is complete follow the steps below to
configure the MRD-310/330, for reference Figure 51 show an
example configuration.
1. Click the Network tab on the main menu, then select
DNS from the sub-menu, this will display the DNS page, the
Dynamic DNS settings are in the section titled Dynamic DNS
Client Configuration.
2. Tick Enabled checkbox.
3. Select the service provider from the Service drop-down
menu.
4. Enter the Domain in the Domain text box.
5. Enter the username for your account in the Username text
box.
6. Enter the password for your account in the Passoword text
box.
7. Click the Update button to save the changes.
Figure 51: Dynamic Domain Name Service (DNS) Client configuration.