beautypg.com

4 raw udp – Westermo MRD-3x0 User Manual

Page 166

background image

166

6623-3201

7.4 Raw UDP

7.4.1 Description

This function is similar to Raw TCP Client/Server mode, but 
uses UDP as the network transport. UDP has lower over-
heads than TCP, but as UDP offers no lost packet detection, 
this function should only be used with serial protocols than 
can provide the necessary error correction.

7.4.2 Selecting the port function

The serial server configuration is accessed by selecting Serial
Server from the main menu and Port Setup from the submenu. 
To enable a port for Raw UDP function, select Raw UDP from 
the Function column of the appropriate port. Once selected, 
click Update to confirm the change. Once confirmed, the port 
will display as shown in Figure 121.

Figure 121: Selecting Raw UDP function

See also other documents in the category Westermo Equipment: