Westermo MRD-3x0 - Manual (Page 30)

30 6623-3201
The 3G network provider will provide the items listed below
which should be entered into the appropriate fields in the Add
new profile section as shown in Figure 29.
APN (Access Point Name) •
Dial string •
Authentication (None / PAP / CHAP) •
Username •
Password •
Figure 29: Adding a new profile.
Note: In order to set a password click the check-box marked
New, the password can now be entered in the text field. The
password is visible as it is being typed so that it can be
checked for errors prior to being set, once set the password
will no longer be visible.
Note: The provider may not supply a username and password
if network authentication is not required, in this case set the
Authentication to None, leave the username blank and do not
set a password.
Once the data has been entered click the Update button
to add the profile. The screen will now change to show the
added profile as shown in Figure 30, as this is the only profile
entered it will be automatically selected as the current profile
and the profile entry will be shaded green to indicate that it is
the selected profile.
Enter APN
Enter dial string
Set Authentication
Enter username
Enter password
Click "Update"
to save profile