Westermo MRD-3x0 - Manual (Page 43)

43 6623-3201
3.3.3 Remote Poll Setup
The remote poll setup is used to specify the poll type to use
and the address of the server to poll. A primary and second-
ary server may be specified, the secondary server will be used
if the primary server cannot be contacted. The options are:
Primary poll type
Specify the poll type, the options are:
1. Disabled: Primary poll is disabled.
2. Ping (ICMP): Ping the specified address.
3. TCP Socket: Establish a TCP socket to the specified address,
the connection will be established then after a few seconds
terminated.
Primary poll address
Specify the address of the primary server to poll.
Backup poll type
1. Disabled: Primary poll is disabled.
2. Ping (ICMP): Ping the specified address.
3. TCP Socket: Establish a TCP socket to the specified address,
the connection will be established then after a few seconds
terminated.
Backup poll address
Specify the address of the secondary server to poll.