Westermo MRD-3x0 - Manual (Page 119)

119 6623-3201
Tunnel Configuration
IPsec Tunnel configuration is the first stage in adding a new
IPsec tunnel. The options are as follows:
Label
Set the label or name for the tunnel. This is used as a refer-
ence and is particularly useful when more than one tunnel is
configured.
Enabled
Check the box to enable the IPsec VPN.
Local interface
Select the interface over which to create the tunnel, from the
following options:
Default (Default) •
The interface to which the default route directs
connections.
WLS •
The wireless interface.
LAN •
The LAN (Ethernet) interface.