Welltech WG26xx Series V.1.08a User Manual
Page 94

26xx Technical Manual EN-V108
93
Step 2: create a template configuration file
Open the “wg26 Parameter.txt” getting from Welltech and make the required
change. Please at least make the changes for those provisioning and SIP proxy
settings. For detail, please refer the comments of “wg26 Parameter.txt”.
Step 3: Make the change for wegencfg.ini as follows if necessary
# Template File
BaseFile=.\wg26 Parameter.txt
# MAC list file
ListFile=.\wg26 MAC.csv
# 0: Off, 1: On
Encrypt=0
Step 4: Generate the individual configuration file.
Double click the “wtgencfg.exe”, it will generate the configuration file for each
MAC list in “MAC address.cfg” as the following pictures.
This manual is related to the following products: