Welltech WG26xx Series V.1.08a - Manual (Page 21)

26xx Technical Manual EN-V108
20
3.2.2. LAN Setting
LAN Setting
ITEM Description
LAN Mode It supports Bridge or NAT mode
LAN IP address Specify the IP address of the 26XX LAN
port.
LAN mask address Specify the mask address for 26XX
LAN port.
DHCP server Enable/Disable DHCP function on
the LAN port. Once enabled, the LAN
ports will function as a DHCP server,
network devices connected to them
will be issued with IP addresses.
IP address from When DHCP is enabled, you can
specify the IP address to start from
when assigning to attach network
devices.
IP address to When DHCP is enabled, you can
specify the ending IP address assigned
to the attached network devices.