Welltech WG26xx Series V.1.08a - Manual (Page 56)

26xx Technical Manual EN-V108
55
and Off time for tone 1 and 2.
P.S. If the disconnect tone only has
single frequency, please set it to low
frequency. If the disconnect tone only
has single cadence, please set it to
Tone 1.
Disconnect tone 2 Specify the pattern of the disconnect
tone for disconnect tone 2 (second
set), you can adjust the high
frequency, low frequency, high level,
low level, the On and Off time for tone
1 and 2.
P.S. If the disconnect tone only has
single frequency, please set it to low
frequency. If the disconnect tone only
has single cadence, please set it to
Tone 1.
1. Press the “Apply” button (at the bottom) after you finish to save changes.
2. Press the “Reboot” button to apply the changes.