Welltech WG26xx Series V.1.08a User Manual
Page 70

26xx Technical Manual EN-V108
69
3.5.4 Upgrade Firmware
Http Upload
Specify the location of the firmware for
uploading through Http.
1.
Under Device Management => Software Upgrade web menu, specify the
location of the firmware by clicking the Browse button next to the Http Upload
text box.
2.
You will be prompted with a window requesting the location of the firmware.
3.
Locate the firmware that is stored in your hard drive.
4.
Once located, click the Open button.
5.
Back in the web configuration menu, press the Start button (next to the Http
Upload’s browse button) to execute the upgrade process.
6.
Please wait while the device updates itself with the firmware.
7.
After the update process is finish, you will be taken to a web page indicating
that it was successful (see figure below).
Note: For consistency, it is recommended to reload default setting
every time
you update the firmware on the WELLGATE 26XX. However, you will lose all the
settings configured on the WELLGATE 26XX except Network configuration. For
more details on reload default setting, please refer to the next page below.