Welltech WG26xx Series V.1.08a - Manual (Page 34)

26xx Technical Manual EN-V108
33
No Answer Forward Time (FXS only) If you enable the No Answer Forward
function (sip trunk number or L1~L8
number), please specify the time of no
answer. The default setting is 180 sec.
FAX Enable/Disable FAX T.38 function.
Line1~Line8 relevant data
Type Displays the port type of that particular
line.
Enable Enable the line or not
Reg Register or Unregister to SIP Proxy
Number Displays the line numbers that specified
in SIP Setting.
Account: Input the SIP Proxy
registration account ID.
Number: Input the phone number.
Password: Input the password of IP
Proxy registration account ID.
Display name: Specify the Display
name of the phone number.
The first is the number registers to
Primary proxy.
The default setting is 1000~1007.
Enable Hotline Click the check box to enable hotline
feature. If enabled, The check box will
display as .
Hotline Number Specify the number to forward the call to
when the Hotline feature is enabled.
Wait to Hotline(sec) Specify the time (sec) for wait to hotline,
the default value is 0.
Forward Type (FXS only) Specify the forwarding type to use, you
can choose the following:
Disable
Unconditional
Busy
No Answer
Busy and No Answer