Welltech WG26xx Series V.1.08a - Manual (Page 32)

26xx Technical Manual EN-V108
31
3.3.4 Payload Type Setting
RFC2833 payload type Specify the RFC2833 payload type
(range is 96~128, however 100,
102~105 is reserved by other payload
types).
FAX bypass payload type Specify the FAX payload type (range is
96~128, however 100, 102~105 is
reserved by other payload types)
Modem by pass payload type Specify the Modem by pass payload
type (range is 96~128, default value is
103. 100, 102, 104, 105 is reserved by
other payload types).
1. Press the “Apply” button (at the bottom) after you finish to save changes.
2. Press the “Reboot” button to apply the changes.