beautypg.com

Welltech WG26xx Series V.1.08a User Manual

Page 19

background image

26xx Technical Manual EN-V108

18

3.2.1.2 WAN Setting --DHCP

1.

Press the “Apply” button (at the bottom) after you finish to save changes.

2.

Press the “Reboot” button to apply the changes.

P.S. When you are using DHCP in WAN and WAN’s Ethernet cable are not

connected, you will not able to access Wellgate by using WAN port if you

don’t know the DHCP IP address. In this case, please connect to LAN

port and access it.

This manual is related to the following products: