Welltech WG26xx Series V.1.08a - Manual (Page 43)

26xx Technical Manual EN-V108
42
3.3.10 Syslog Setting
This syslog is used to send the debug log from Wellgate 26xx to syslog server.
Syslog mode Select the Syslog mode for Enable or
Disable. If you Enable this feature,
please specify the Syslog Server
address and port number at the Syslog
server address and port’s text box,
then you can get detail system log
from Syslog server.
Syslog Server address If you Enable the Syslog mode, please
specify the IP address of Syslog Sever
for data storage.
Syslog Server port Specify the Syslog Server port number,
The default port number is 514.
1. Press the “Apply” button (at the bottom) after you finish to save changes.
2. Press the “Reboot” button to apply the changes.