Welltech WG26xx Series V.1.08a - Manual (Page 13)

26xx Technical Manual EN-V108
12
3.2 Network Configuration
The following instructions will explain the configurations for setting up the WAN
port of the 26xx. There are in total three methods of connections: Static IP,
DHCP and PPPoE.
Note: You can retrieve the IP address of the WAN port by keying #126 on the
phone set that is connected to the FXS port of the gateway. You will hear an IVR
announcing the current IP address of the WAN port.
3.2.1 WAN Setting
The table shown below describes the configuration items for 3 connection types
of network (Static IP, DHCP and PPPoE).