Environment setup and ip connection, 1 configuration – Welltech WG26xx Series V.1.08a User Manual
Page 10

26xx Technical Manual EN-V108
9
3. Environment Setup and IP Connection
First of all, connect your computer to Wellgate 26xx’s LAN port by using DHCP.
The IP address assign to your computer should be 192.168.123.x by default.
Once you can get the IP address from Wellgate 26xx, you can start the
configuration as below.
3.1 Configuration
Login to the WELLGATE 26XX web configuration menu
1.
Open your WEB browser and key in the default IP address of the gateway
(http://192.168.123.123) in the Address box (see figure below).
3. You will see a pop-up window requesting username and password before you
can login to the web configuration menu. Username is “
root
” while password is
“
root
“(see figure below).
This manual is related to the following products: