Environment setup and ip connection – Welltech WG2626 V.2.0 User Manual
Page 7
WellGate 2626 User Manual EN-V2.0
Copyright © 2010 Welltech Computer Co., Ltd. All right reserved.
6
Environment Setup and IP Connection
Please make sure that the network interface of your computer is working fine and
the
cross over line
(RJ-45) is connected to the computer correctly.
The WG2626 by default uses DHCP for its LAN port and assigns IP
addresses to clients connected to it, please make sure that your PC or
Notebook’s network configuration is set to DHCP.
Configuration
Login to the WG2626 web configuration menu
1.
Get an Ethernet Cable to connect your PC and WG2626 with LAN 1 port, then
the DHCP server of WG2626 LAN will assign IP address (192.168.123.1) for
your PC.
2.
Open your WEB browser and key in the IP address of the gateway
(http://192.168.123.123) in the Address box (see figure 1).
(Figure 1)