Welltech WG2626 V.2.0 - Manual (Page 14)

WellGate 2626 User Manual EN-V2.0
Copyright © 2010 Welltech Computer Co., Ltd. All right reserved. 13
Device_WAN Setting --DHCP
(Figure 7)
1. If you select the “DHCP” mode, please Specify the marked item shown as the
figure 7.
2. Press the “Apply” button (at the bottom) after you finish to save changes.
3. Press the “Reboot” button to apply the changes.
Device_WAN Setting --PPPoE
(Figure 8)
1. When you select the “PPPoE” mode, please Specify the marked item shown as
the figure 8.
2. Press the “Apply” button (at the bottom) after you finish to save changes.
3. Press the “CANCEL” button (next to the Apply button) to clear the values in
the page.
4. Press the “Reboot” button to apply the changes.