Welltech WG2626 V.2.0 - Manual (Page 17)

WellGate 2626 User Manual EN-V2.0
Copyright © 2010 Welltech Computer Co., Ltd. All right reserved. 16
Service_Extension Line
(Figure 11)
In the “Service_Extension Line Setting” section (see figure 11), you can set the
operator priority of the extensions for incoming call. The detail instruction
explained below:
Caller ID Enable or Disable the Caller ID
Sending to Telephone Set. You have to
use Caller ID phone in order to display
the caller information. If unsure,
please set to Disable.
Caller ID Type Specify the caller ID Type of your
phone set : DTMF, FSK(Bellcore),
ETSI(Before Ring) or ETSI(Between
Ring)
Operator Ring Mode Specify the Operator Ring Mode:
1. “Priority Ring” : The operator will be
hunted based on the priority
defined in extension. If the higher
priority’s extension is busy, the call
will automatically hunt to second
one and so on.
2. Simultaneous Ring: Parallel Ring all
priority of operators’ extension,
exclude those extension’s operator
set to”NA”.
Ring Time Specify ring time: 5~60 sec. It is used
for priority hunting which define how