Welltech WG2626 V.2.0 - Manual (Page 20)

WellGate 2626 User Manual EN-V2.0
Copyright © 2010 Welltech Computer Co., Ltd. All right reserved. 19
(Figure 13)
In the “Service_SIP Trunk ” section (see figure 13), you have to set the SIP
account for VOIP service.
SIP Trunk Setting
SIP incoming Route Specify the SIP incoming call routing
rule, via IVR or direct to operator.
Route to Operator if IVR busy If you select IVR mode for SIP
incoming call, system will route the call
to operator automatically when IVR is
busy.
Set “Yes” to enable.
Set “No” to disable.
Secondary SIP Proxy Server Enable/Disable Secondary SIP Proxy
Server
SIP Account Setting
Line Number Specify the SIP line number
(This item is essential for VOIP
service)
User ID Specify SIP account
(This item is essential for VOIP
service)
Password Set password of SIP account
(This item is essential for VOIP
service)
Primary SIP Proxy Server Specify the IP address
(This item is essential for VOIP
service)
Primary SIP Proxy Port Specify the port number, the default
port number is 5060
(This item is essential for VOIP
service)
Primary SIP Domain Specify the Domain name
Primary Outbound Proxy Server Specify the IP address
Primary Outbound Proxy Port Specify the port number, the default
port number is 5060
Secondary SIP Proxy Server If you “Enable” the Secondary SIP
Proxy Server, please set the IP address
Secondary SIP Proxy Port Specify the port number, the default