Welltech WG2626 V.2.0 - Manual (Page 30)

WellGate 2626 User Manual EN-V2.0
Copyright © 2010 Welltech Computer Co., Ltd. All right reserved. 29
Function: Disable
Leading digit: 02
Total digit count: 10
If the user set the Function parameter
as “Disable”, the call number with a
length of 10 digits and a prefix of 02
will proceed as normal. The user will
need to wait until dial timeout period
for the call to be made, or press the
“#” on the keypad at the end of the
dialing number to make the call.
You can configure up to 50 entries in
the Dial Plan.
1. Press the “Apply” button (at the bottom) after you finish to save changes.
2. Press the “Reboot” button to apply the changes.