Welltech WG2626 V.2.0 - Manual (Page 25)

WellGate 2626 User Manual EN-V2.0
Copyright © 2010 Welltech Computer Co., Ltd. All right reserved. 24
Advanced Configuration
Advanced Configuration_Call Routing
Call Routing Status: enable or disable this
routing
Prefix: matched DNIS (called
number) prefix.
Min Length: matched DNIS
minimum length. This DM can only
be executing when the received
DNIS is longer than it.
Route to: The outgoing call type
could be (FXO / FXS / VOIP)
Backup route to: If primary route
is unable to reach the destination,
whether to use the backup routing
or not. The backup outgoing call
type could be (FXO / FXS / VOIP)
which require being different as
the same type of primary route.
DM Group: The DM group here
can be used as the DM after
routing rule was selected. It is
useful especially when you have
different dialing plan for backup
route.