Welltech WG2626 V.2.0 - Manual (Page 5)

WellGate 2626 User Manual EN-V2.0
Copyright © 2010 Welltech Computer Co., Ltd. All right reserved. 4
Appearance
1. Front Panel: LED Indicators
LED Description
Power When the power adapter is connected, the LED will light up
green.
Ready The LED will light up green after system initialized.
Proxy When the gateway is registered successfully to a Proxy, this
LED will light up green.
WAN This LED will light up green when the gateway’s WAN port is
physically connected to the public internet. When data is
transmitted through this port, it will flash green.
The default IP of WAN port is 10.1.1.3.
LAN 1~LAN4 The respective LED will light up green when the relative LAN
port is physically connected to a local network. When data is
transmitted through this port, it will flash green.
The default IP of LAN port is 192.168.123.123.
L1 The status LED for FXO port 1, this will light up amber orange
when the port is in used. It will flash amber orange when
there is no connection with PSTN.
T1 The status LED for FXS port 1, this will light up amber orange
when the connected phone’s handset is off-hook, or when the
connected phone is engaged in a conversation. It will flash
amber orange when there is an incoming call.
L2 The status LED for FXO port 2, this will light up amber orange
when the port is in used. It will flash amber orange when
there is no connection with PSTN.
T2~T6 The status LED for FXS port 2~6, the respective LED will light
up amber orange when the connected phone’s handset is
off-hook, or when the connected phone is engaged in a
conversation. It will flash amber orange when there is an
incoming call.